Delcam PowerInspect 2012 R2 SP1 | 801.5 mb
Delcam PowerINSPECT 2012 R2 software includes enhancements to the
inspection capabilities and also continues the development of the
reverse engineering functionality. The main development in this area has
been an expansion of the -Digitised Curves" option to create a powerful
re-engineering and modelling tool.
New module allows PowerINSPECT to create efficient inspection sequences
for use on dual-column CNC coordinate-measuring machines. This
development continues the drive to make PowerINSPECT the preferred
inspection software for all types of metrology equipment.
Improvements to the inspection functionality within the new PowerINSPECT release include a simplified procedure enabling users to quickly calibrate the probe assembly by probing a single point anywhere within the measuring envelope; an offset-alignment method that aligns the part with the axes of the CMM while setting the position with a single point measurement; and extra point-cloud options that make it easier to modify and reuse digitised curves and points, with options for editing, deleting and resuming measurement of the points and curves.
Service Pack 1 is a recommended update for existing installations of PowerINSPECT 2012 R2. The bug fixes and changes introduced with PowerINSPECT
Fixed bug: Exporting surface inspection as point cloud didn't support projected position and vector properly.
Fixed bug: SelectedSurface success could depend on alignment
Fixed bug: CNC Section: some points could appear on the opposite side of a thin blade.
Improved changing settings in global labels setting dialog.
Fixed bug: Modifying a best fit could reset the item regeardless of whether PowerINSPECT allows the Reset command.
Improved calculation of Inside and Outside Distance for two circles when the normals of the reference planes are not parallel.
Fixed bug in the approximation of Digitised curves in inches.
Fixed bug: 125% DPI caused dialog captions to disappear.
Fixed bug: Picked point alignment ignored hidden levels.
Fixed bug: the transfer of point cloud used by PickedPoints alignment crashes PowerINSPECT.
Fixed bug: Print Preview of point cloud in surface inspection group gave memory exception in PowerINSPECT.
Fixed bug: dgk surface tesselation produced broken lines away from surfaces.
Fixed bug: deleting all measures using Automation caused PowerINSPECT to become unresponsive.
Remove the possibility of PowerINSPECT to become unresponsive when an emergency stop is issued in I++.
Reduced excessive I++ Client tool connection traffic.
Inserted Machine Orientation into OMV Probepath when importing surface points.
Fixed bug: Info tab displayed wrong CAD coordinates for inspection point probe centre.
Fixed bug: Calculation of Medium Offset Plane could fail for some input.
Fixed crash compensating a single point along a line from point and vector.
Prevented feature tab writing probepaths to point source items.
Fixed bug: Display of torus waas incorrect when end angle was slaller then start angle.
Fixed memory leak in Point cloud sub-items.
Prevented probe changing during simulation.
Changed name of folder for probe heads files: TesaStar-i.
Fixed bug: Probed parallel plane tolerance was incorrect.
Fixed bug: RPS dialog did not get item features nominals correctly.
Fixed bug: section curves were incomplete.
Swapped direction for the colour bar in the Print Preview for Inspection groups.
Fixed bug: in some cases trying to pick a cylinder created a plane instead.
Fixed bug: Loading a particular .pwi document made the CAD view go black.
Fixed bug: DMIS add-in was loaded twice.
Fixed bug: Feature tab could undo mirror wizard operations for active item.
Added support for ddz files with GD&T created in PowerSHAPE.
Fix strange label behaviour in case of short item names and resized PowerINSPECT.
Fix bug: Probe/scanned points were not exported in CMM coordinates via Export as CAD.
Fix bug: Dimension anchors were not mirrored by the mirror wizard.
Fix bug: I++ Probe Matching button overlapped other buttons on Machine Tab.
Resized the dual column simulator and collision prediction configuration dialog.
Fixed bug: I++ protocol did not correctly sync tool properties such as approach/retract distance after a tool change.
Fixed bug: Calibration Settings and Change button enable state were not consistent.
Fixed bug: point cloud acquisition shading was too dark on revserse side.
Fixed crash when a new circle on Feature tab is created if a legacy PLP alignment is used.
Fixed bug: inspection group dialog did not remember the label for point names.
Fixed bug: some GD&T symbols (profile of surface, profile of line) were missing in Excel report.
Fixed bug: if report header or footer contains long text, it was not truncated but went outside the table.
Fixed bug: when user changes template in Cad View Report item, -Name- column was not updated.
Added ability to show IJK vector for inspection points on report.
Fixed bug: Saving/loading session changed order of User and Non-user CAD levels.
Fixed crash: using automation and trying to access SequenceItem.CNCProbePathParameters() when the PI flavour does not have a simulator caused a crash.
Fixed bug: Dimensions ignored the active alignment.
Fixed bug: Dimensions item creation can ignore insert cursor: on rare occasions, dimensions may disappear following creation.
Fixed crash: Angle between two planes dimension item crashes in Korean.
Modified layout of the Inspection Group dialog to fit German translation.
Fixed bug: The overall length was impossible to display on slots created in previous versions of PowerINSPECT. The light bulb was missing in the Modify Item dialog.
Modified updates on tolerances when editing slot's dimensions.
MetronorDevices protocol: Add locale independence (it was unable to obtain contact points with Norwegian language settings).
LeicaTracker protocol: Add RegLTControl.bat for user convenience.
FaroTracker protocol: Add support for Vantage Tracker.
Fixed bug: SPC addin not working properly with some language settings.
Fixed crash in Template Editor when trying to work with loaded template.
Fixed bug: PowerINSPECT got into continuous feedback loop if play was started while in Teach and Learn mode.
Fixed bug: In manual mode, creating a probe path was defaulting to AutoDefined - Fallback instead of UserDefined - Teach&Learn.
Fixed bug: Labels for points disappeared if the points went to the right part of the screen or CAD View was zoomed in.
PantecSDK protocol: Corrected Handshake format.
Fix security holes in PowerINSPECT Lite.
Prevent I++ Measure data being discarded when an effective radius is present.
Fix bug: excluding points from fitting and deleting them made the following points in the list to be excluded from fitting.
Stiefelmayer protocol: SB controller dedicated TCP/IP connection support.
Updated tip position after changing units.
Kreon protocol: Add 64-bit support.
Fixed crash: Mirroring crashed PowerINSPECT when processing Probe Change item.
Removed AutoTouchTrigger from the omv lite strategy list.
MetronorDevices protocol: fixed bug where Probe orientation was not shown.
Fixed bug: TemplateEditor crashed if run on a development PC where PI 32 bit was not installed.
Fixed script error in Inspection Group with CVR.
Fixed bug: no message shown saving over document in BETA versions.
Fixed bug: diameter dimentioning was marked as out of tolerance but actually it was in tolerance.
Fixed bug: Point cloud points did not project immediately.
Fixed bug inloop behaviour for dual-column replay.
Made sure it is not possible to disable a column during replay.
PWIToolBox: Add support for TCPIP to use optional string terminators.
Fixed bug: changing Probe Path Verification flag in Options Dialog did not update PPath.
Fixed bug: nominal items with UseNominals off were not displayed.
CMMDriver: Trace logging now include timestamps.
Fixed uninitialised memory use in optimised projection of point clouds.
Reports: changed charset for Printing header and footer from ANSI to Default.
Updated ppath of retrace point when XYZ boxes are changed.
Fixed bug: GD&T result preview was blank for Lite flavours.
Fixing occasional crash when closing second document.
Made sure save changes prompt appears when closing modified document with multiple views.
Fixed crash: when deleting measure and then save the session for a particular pwi file.
Fixed crash: pressing the probe internally/externally button on the feature tab for probed line did not causes the button to change state.
LeicaTracker protocol: Fix bug: TProbe 4 button config setting was not maintained.
StiefelmayerCMM protocol: Implemented a local probe path moves queue.
DevaCMM protocol:fixed bug: Events not firing and forced homed status update.
Fixed bug: edge points not working with cylindrical probes.
Fixed bug: repeatability item did not work.
Fixed crash on pressing OK button in the Point Cloud Acquisition Options dialog.
Fixed crash on editing probe path points coordinates in probe path details.
Fixed bug: tolerance for slots' length incorrect when swapping between overall length and distance between centres.
Fixed crash when manipulating point sources on an on-the-fly inspection group.
Pantec protocol: Added support for Manual Mode and its selection using the Handbox.
Fixed bug: section probe paths could be incomplete.
LeicaTracker protocol: Standard Statistics Mode to be set upon Connection.
Fixed bug: point cloud capture was available with laser in manual without the licence.
Fixed repeatability item report.
Fixed bug: Offset line between two points where the first offset is 0.0 and the second offset is negative could have a big value for straightness.
Fixed bug: display of Six Degrees of Freedom Item in Inches was incorrect.
Fixed crash on Delete probe path.
Fixed bug :simulation in OMV in Inches calculated the first move of the probe path incorrectly.
Prevent Feature tab crashing when pointsources are removed.
Stiefelmayer protocol: Increase max moves sent to controller from 10 to 100.
Fixed bug: Powerinspect was becoming non responsive when a non committed raster scan was simulated.
PantecSDK protocol: Fix Status Mode bits in M883 format and clear Handbox buffer.
About Delcam plc
Delcam is a world-leading developer and supplier of advanced CADCAM software, with more than 35,000 customers in over 80 countries. These clients vary from global names like Nike, Boeing and Mattel to small start-ups and individual craftsmen. Founded 30 years ago, we are the largest developer of product development software in the UK, with subsidiaries in Europe, America and Asia. Our global success has been recognised with many awards, including three Queen's Awards for Enterprise in the last six years.
Name: Delcam PowerInspect
Version: 2012 R2 SP1 build 12.2.0.1
Home: www.powerinspect.com
Interface: multilanguage
OS: Windows XP / Vista / Seven
Size: 801.5 mb
Special Thanks SSQ
All parts on filepost.com, rapidgator.com, luckyshare.net interchanged. It is added by 5% of the overall size of the archive of information for the restoration
Improvements to the inspection functionality within the new PowerINSPECT release include a simplified procedure enabling users to quickly calibrate the probe assembly by probing a single point anywhere within the measuring envelope; an offset-alignment method that aligns the part with the axes of the CMM while setting the position with a single point measurement; and extra point-cloud options that make it easier to modify and reuse digitised curves and points, with options for editing, deleting and resuming measurement of the points and curves.
Service Pack 1 is a recommended update for existing installations of PowerINSPECT 2012 R2. The bug fixes and changes introduced with PowerINSPECT
Fixed bug: Exporting surface inspection as point cloud didn't support projected position and vector properly.
Fixed bug: SelectedSurface success could depend on alignment
Fixed bug: CNC Section: some points could appear on the opposite side of a thin blade.
Improved changing settings in global labels setting dialog.
Fixed bug: Modifying a best fit could reset the item regeardless of whether PowerINSPECT allows the Reset command.
Improved calculation of Inside and Outside Distance for two circles when the normals of the reference planes are not parallel.
Fixed bug in the approximation of Digitised curves in inches.
Fixed bug: 125% DPI caused dialog captions to disappear.
Fixed bug: Picked point alignment ignored hidden levels.
Fixed bug: the transfer of point cloud used by PickedPoints alignment crashes PowerINSPECT.
Fixed bug: Print Preview of point cloud in surface inspection group gave memory exception in PowerINSPECT.
Fixed bug: dgk surface tesselation produced broken lines away from surfaces.
Fixed bug: deleting all measures using Automation caused PowerINSPECT to become unresponsive.
Remove the possibility of PowerINSPECT to become unresponsive when an emergency stop is issued in I++.
Reduced excessive I++ Client tool connection traffic.
Inserted Machine Orientation into OMV Probepath when importing surface points.
Fixed bug: Info tab displayed wrong CAD coordinates for inspection point probe centre.
Fixed bug: Calculation of Medium Offset Plane could fail for some input.
Fixed crash compensating a single point along a line from point and vector.
Prevented feature tab writing probepaths to point source items.
Fixed bug: Display of torus waas incorrect when end angle was slaller then start angle.
Fixed memory leak in Point cloud sub-items.
Prevented probe changing during simulation.
Changed name of folder for probe heads files: TesaStar-i.
Fixed bug: Probed parallel plane tolerance was incorrect.
Fixed bug: RPS dialog did not get item features nominals correctly.
Fixed bug: section curves were incomplete.
Swapped direction for the colour bar in the Print Preview for Inspection groups.
Fixed bug: in some cases trying to pick a cylinder created a plane instead.
Fixed bug: Loading a particular .pwi document made the CAD view go black.
Fixed bug: DMIS add-in was loaded twice.
Fixed bug: Feature tab could undo mirror wizard operations for active item.
Added support for ddz files with GD&T created in PowerSHAPE.
Fix strange label behaviour in case of short item names and resized PowerINSPECT.
Fix bug: Probe/scanned points were not exported in CMM coordinates via Export as CAD.
Fix bug: Dimension anchors were not mirrored by the mirror wizard.
Fix bug: I++ Probe Matching button overlapped other buttons on Machine Tab.
Resized the dual column simulator and collision prediction configuration dialog.
Fixed bug: I++ protocol did not correctly sync tool properties such as approach/retract distance after a tool change.
Fixed bug: Calibration Settings and Change button enable state were not consistent.
Fixed bug: point cloud acquisition shading was too dark on revserse side.
Fixed crash when a new circle on Feature tab is created if a legacy PLP alignment is used.
Fixed bug: inspection group dialog did not remember the label for point names.
Fixed bug: some GD&T symbols (profile of surface, profile of line) were missing in Excel report.
Fixed bug: if report header or footer contains long text, it was not truncated but went outside the table.
Fixed bug: when user changes template in Cad View Report item, -Name- column was not updated.
Added ability to show IJK vector for inspection points on report.
Fixed bug: Saving/loading session changed order of User and Non-user CAD levels.
Fixed crash: using automation and trying to access SequenceItem.CNCProbePathParameters() when the PI flavour does not have a simulator caused a crash.
Fixed bug: Dimensions ignored the active alignment.
Fixed bug: Dimensions item creation can ignore insert cursor: on rare occasions, dimensions may disappear following creation.
Fixed crash: Angle between two planes dimension item crashes in Korean.
Modified layout of the Inspection Group dialog to fit German translation.
Fixed bug: The overall length was impossible to display on slots created in previous versions of PowerINSPECT. The light bulb was missing in the Modify Item dialog.
Modified updates on tolerances when editing slot's dimensions.
MetronorDevices protocol: Add locale independence (it was unable to obtain contact points with Norwegian language settings).
LeicaTracker protocol: Add RegLTControl.bat for user convenience.
FaroTracker protocol: Add support for Vantage Tracker.
Fixed bug: SPC addin not working properly with some language settings.
Fixed crash in Template Editor when trying to work with loaded template.
Fixed bug: PowerINSPECT got into continuous feedback loop if play was started while in Teach and Learn mode.
Fixed bug: In manual mode, creating a probe path was defaulting to AutoDefined - Fallback instead of UserDefined - Teach&Learn.
Fixed bug: Labels for points disappeared if the points went to the right part of the screen or CAD View was zoomed in.
PantecSDK protocol: Corrected Handshake format.
Fix security holes in PowerINSPECT Lite.
Prevent I++ Measure data being discarded when an effective radius is present.
Fix bug: excluding points from fitting and deleting them made the following points in the list to be excluded from fitting.
Stiefelmayer protocol: SB controller dedicated TCP/IP connection support.
Updated tip position after changing units.
Kreon protocol: Add 64-bit support.
Fixed crash: Mirroring crashed PowerINSPECT when processing Probe Change item.
Removed AutoTouchTrigger from the omv lite strategy list.
MetronorDevices protocol: fixed bug where Probe orientation was not shown.
Fixed bug: TemplateEditor crashed if run on a development PC where PI 32 bit was not installed.
Fixed script error in Inspection Group with CVR.
Fixed bug: no message shown saving over document in BETA versions.
Fixed bug: diameter dimentioning was marked as out of tolerance but actually it was in tolerance.
Fixed bug: Point cloud points did not project immediately.
Fixed bug inloop behaviour for dual-column replay.
Made sure it is not possible to disable a column during replay.
PWIToolBox: Add support for TCPIP to use optional string terminators.
Fixed bug: changing Probe Path Verification flag in Options Dialog did not update PPath.
Fixed bug: nominal items with UseNominals off were not displayed.
CMMDriver: Trace logging now include timestamps.
Fixed uninitialised memory use in optimised projection of point clouds.
Reports: changed charset for Printing header and footer from ANSI to Default.
Updated ppath of retrace point when XYZ boxes are changed.
Fixed bug: GD&T result preview was blank for Lite flavours.
Fixing occasional crash when closing second document.
Made sure save changes prompt appears when closing modified document with multiple views.
Fixed crash: when deleting measure and then save the session for a particular pwi file.
Fixed crash: pressing the probe internally/externally button on the feature tab for probed line did not causes the button to change state.
LeicaTracker protocol: Fix bug: TProbe 4 button config setting was not maintained.
StiefelmayerCMM protocol: Implemented a local probe path moves queue.
DevaCMM protocol:fixed bug: Events not firing and forced homed status update.
Fixed bug: edge points not working with cylindrical probes.
Fixed bug: repeatability item did not work.
Fixed crash on pressing OK button in the Point Cloud Acquisition Options dialog.
Fixed crash on editing probe path points coordinates in probe path details.
Fixed bug: tolerance for slots' length incorrect when swapping between overall length and distance between centres.
Fixed crash when manipulating point sources on an on-the-fly inspection group.
Pantec protocol: Added support for Manual Mode and its selection using the Handbox.
Fixed bug: section probe paths could be incomplete.
LeicaTracker protocol: Standard Statistics Mode to be set upon Connection.
Fixed bug: point cloud capture was available with laser in manual without the licence.
Fixed repeatability item report.
Fixed bug: Offset line between two points where the first offset is 0.0 and the second offset is negative could have a big value for straightness.
Fixed bug: display of Six Degrees of Freedom Item in Inches was incorrect.
Fixed crash on Delete probe path.
Fixed bug :simulation in OMV in Inches calculated the first move of the probe path incorrectly.
Prevent Feature tab crashing when pointsources are removed.
Stiefelmayer protocol: Increase max moves sent to controller from 10 to 100.
Fixed bug: Powerinspect was becoming non responsive when a non committed raster scan was simulated.
PantecSDK protocol: Fix Status Mode bits in M883 format and clear Handbox buffer.
About Delcam plc
Delcam is a world-leading developer and supplier of advanced CADCAM software, with more than 35,000 customers in over 80 countries. These clients vary from global names like Nike, Boeing and Mattel to small start-ups and individual craftsmen. Founded 30 years ago, we are the largest developer of product development software in the UK, with subsidiaries in Europe, America and Asia. Our global success has been recognised with many awards, including three Queen's Awards for Enterprise in the last six years.
Name: Delcam PowerInspect
Version: 2012 R2 SP1 build 12.2.0.1
Home: www.powerinspect.com
Interface: multilanguage
OS: Windows XP / Vista / Seven
Size: 801.5 mb
Special Thanks SSQ
All parts on filepost.com, rapidgator.com, luckyshare.net interchanged. It is added by 5% of the overall size of the archive of information for the restoration
Download
http://extabit.com/file/279lq7n8qzkkx/podein12r2s1.rar
or
http://uploaded.net/file/gumt2msn/podein12r2s1.rar
or
http://ryushare.com/a186b91a5cb/podein12r2s1.rar
0 Comments:
Post a Comment