It product lifecycle management Software announced the latest release of NX software,
the company's fully integrated computer-aided cad design, manufacturing and
engineering analysis (CAD/CAM/CAE) solution.
Agile product lifecycle management The latest version, NX 8.5, includes extensive customer-driven enhancements and new capabilities that provide increased flexibility and productivity across product engineering and product lifecycle management software to help reduce time to market. NX 8.5 builds on Siemens plm solution Software's HD-PLM vision, which was established to help companies make smarter decisions more efficiently and with a higher level of confidence.
Agile product lifecycle management The latest version, NX 8.5, includes extensive customer-driven enhancements and new capabilities that provide increased flexibility and productivity across product engineering and product lifecycle management software to help reduce time to market. NX 8.5 builds on Siemens plm solution Software's HD-PLM vision, which was established to help companies make smarter decisions more efficiently and with a higher level of confidence.
Siemens PLM NX 8.5.1.3 MP01 Update (x86/x64) | 266/321 MB
What's fixed in 8.5.1.3 MP01:
The problem where the Advanced Description did not work correctly using the Viewport option in CGM Viewer is fixed.
The problem where a session would not start due to a very large memory file is fixed.
The problem in Manufacturing where searching a Tool in Teamcenter Integration mode was slow is improved.
The problem where on certain machines, run_managed did not load resources on a shared drive is fixed.
The problem in Teamcenter Integration for NX where attribute mapping from a component in the BOM resulted in an incorrect value is fixed.
The problem in Teamcenter Integration for NX where loading and saving an assembly with Structure Only caused the REFERENCE_COMPONENT attribute to be deleted is fixed.
The problem in Drafting where the Surface Finish Symbol in drawing templates was deleted when a drawing was created is fixed.
The problem where the 2D Exchange Translator for pattern files did not export if the name had an underscore in it in Teamcenter Integration mode is fixed.
The problem where editing some tabular notes with attribute references caused an error is fixed.
The problem where certain attributes referenced by annotations caused errors during save is fixed.
The problem in Teamcenter Integration for NX where some legacy parts with a forward slash "/" in the name could not be opened is fixed.
The problem where opening an assembly caused an undesirable update of some parts is fixed.
The problem in Manufacturing where extra lines sometimes were created in Turning Teach Mode is fixed.
The problem where a User Defined Feature could not be positioned using the "Point onto Point" option is fixed.
The problem in Manufacturing where the Cutcom Off Motion was missing when the X Axis vector changed is fixed.
The problem where switching to Advanced Simulation after opening a JT file caused an error is fixed.
The problem in Teamcenter Integration for NX where a Template part was inserted in Manufacturing session instead of using it is fixed.
The problem in Translators where an IGES-File created by "Vectron VMC5264L" could not be imported has been enhanced.
The problem where the line width scale in Visualization Preference dialog was incorrectly displayed is fixed.
See Note 1-1 below.
The problem in NX Open where the function ContainerFeature returned a null value is fixed.
The problem where a PMI Cylindrical Dimension in a Lightweight Section View could not be updated and caused errors is fixed.
The problem in Manufacturing where Teamcenter item type Mfg0MExxxx was not available in File->New dialog is fixed.
The problem where loading some parts fully caused uncontrolled updates is fixed.
The problem in Drafting where the position of some dimensions changed while updating a view is fixed.
The problem in Drafting where updating some drawings caused the session to stop responding is fixed.
The problem in Manufacturing where Edit -> Probing -> Sub-Operation caused an error is fixed.
The problem in Teamcenter Integration for NX where the "Edit Database Attribute" dialog did not appear when creating a drawing from the resource bar is fixed.
The problem in Translators where IGES import/export sometimes did not work is fixed.
The problem in Teamcenter Integration for NX where a component whose attributes were edited using the Edit Reusable Component function could end up being incorrectly placed at the origin after a save is fixed.
The problem in Assemblies where part loading caused some unnecessary updates is fixed.
The problem where associativity with attributes on axis coordinate systems did not work is fixed.
The problem in Routing where the Item "Type" for NX Routing generated components could not be set is fixed.
The problem where the application was in a wait state when starting from Teamcenter until the mouse was clicked is fixed.
The problem in Manufacturing where a Zlevel profile operation with a ramp on part connection move failed in some areas is fixed.
The problem in Manufacturing where a generating a face milling operation on a sheet body caused the session to terminate is fixed.
The problem in Manufacturing where importing a tool carrier resulted in only one tool per pocket is fixed.
The problem in Translators where NX created JT files caused a warning when imported into Solid Edge is fixed.
The problem in Mold Wizard where adding standard parts with Standard Part Management caused errors is fixed.
The problem in Manufacturing where multi-blade machining paths failed to honor climb/conventional settings is fixed.
The problem in Mold Wizard where parameters in customized Mold Wizard Standard Parts were not displayed is fixed.
The problem in Teamcenter Integration for NX where some attribute values were missing in the ANT column is fixed.
The problem in Translators where some geometry was not exported to STEP is fixed.
The problem where the Advanced Description did not work correctly using the Viewport option in CGM Viewer is fixed.
The problem where a session would not start due to a very large memory file is fixed.
The problem in Manufacturing where searching a Tool in Teamcenter Integration mode was slow is improved.
The problem where on certain machines, run_managed did not load resources on a shared drive is fixed.
The problem in Teamcenter Integration for NX where attribute mapping from a component in the BOM resulted in an incorrect value is fixed.
The problem in Teamcenter Integration for NX where loading and saving an assembly with Structure Only caused the REFERENCE_COMPONENT attribute to be deleted is fixed.
The problem in Drafting where the Surface Finish Symbol in drawing templates was deleted when a drawing was created is fixed.
The problem where the 2D Exchange Translator for pattern files did not export if the name had an underscore in it in Teamcenter Integration mode is fixed.
The problem where editing some tabular notes with attribute references caused an error is fixed.
The problem where certain attributes referenced by annotations caused errors during save is fixed.
The problem in Teamcenter Integration for NX where some legacy parts with a forward slash "/" in the name could not be opened is fixed.
The problem where opening an assembly caused an undesirable update of some parts is fixed.
The problem in Manufacturing where extra lines sometimes were created in Turning Teach Mode is fixed.
The problem where a User Defined Feature could not be positioned using the "Point onto Point" option is fixed.
The problem in Manufacturing where the Cutcom Off Motion was missing when the X Axis vector changed is fixed.
The problem where switching to Advanced Simulation after opening a JT file caused an error is fixed.
The problem in Teamcenter Integration for NX where a Template part was inserted in Manufacturing session instead of using it is fixed.
The problem in Translators where an IGES-File created by "Vectron VMC5264L" could not be imported has been enhanced.
The problem where the line width scale in Visualization Preference dialog was incorrectly displayed is fixed.
See Note 1-1 below.
The problem in NX Open where the function ContainerFeature returned a null value is fixed.
The problem where a PMI Cylindrical Dimension in a Lightweight Section View could not be updated and caused errors is fixed.
The problem in Manufacturing where Teamcenter item type Mfg0MExxxx was not available in File->New dialog is fixed.
The problem where loading some parts fully caused uncontrolled updates is fixed.
The problem in Drafting where the position of some dimensions changed while updating a view is fixed.
The problem in Drafting where updating some drawings caused the session to stop responding is fixed.
The problem in Manufacturing where Edit -> Probing -> Sub-Operation caused an error is fixed.
The problem in Teamcenter Integration for NX where the "Edit Database Attribute" dialog did not appear when creating a drawing from the resource bar is fixed.
The problem in Translators where IGES import/export sometimes did not work is fixed.
The problem in Teamcenter Integration for NX where a component whose attributes were edited using the Edit Reusable Component function could end up being incorrectly placed at the origin after a save is fixed.
The problem in Assemblies where part loading caused some unnecessary updates is fixed.
The problem where associativity with attributes on axis coordinate systems did not work is fixed.
The problem in Routing where the Item "Type" for NX Routing generated components could not be set is fixed.
The problem where the application was in a wait state when starting from Teamcenter until the mouse was clicked is fixed.
The problem in Manufacturing where a Zlevel profile operation with a ramp on part connection move failed in some areas is fixed.
The problem in Manufacturing where a generating a face milling operation on a sheet body caused the session to terminate is fixed.
The problem in Manufacturing where importing a tool carrier resulted in only one tool per pocket is fixed.
The problem in Translators where NX created JT files caused a warning when imported into Solid Edge is fixed.
The problem in Mold Wizard where adding standard parts with Standard Part Management caused errors is fixed.
The problem in Manufacturing where multi-blade machining paths failed to honor climb/conventional settings is fixed.
The problem in Mold Wizard where parameters in customized Mold Wizard Standard Parts were not displayed is fixed.
The problem in Teamcenter Integration for NX where some attribute values were missing in the ANT column is fixed.
The problem in Translators where some geometry was not exported to STEP is fixed.
The problem in Manufacturing where a Generic Motion Controller operation did not work properly is fixed.
DOWN LOAD
---------------------------
OR
0 Comments:
Post a Comment